Venom Automotive

These Remote Oil Filter Relocation Adapters are designed to suit -10AN lines for the best possible oil flow. However, it will also suit -8AN Lines ...

Venom Automotive Ford BARRA Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud...

Honda K-Series Titanium Exhaust Manifold Stud, Nut & Washer Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is design...

Nissan RB20 Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is designed...

Nissan RB25 Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is designed...

Venom Automotive Nissan RB26 Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stu...

Nissan RB30 Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is designed...

Nissan SR20 Titanium Exhaust Manifold Stud, Nut & Washer Kit. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is desi...

Venom Automotive Distributor Delete Cap is CNC'd from 6061 Alloy and designed to blank off the distributor housing on the RB30 Engine.This item wil...

Subaru EJ20 & EJ25 Titanium Exhaust Manifold Stud, Nut & Washer Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit i...

Venom Automotive 1JZ Drive By Wire (DBW) Throttle Body Adaptor is design to mount a Bosch 74mm (PN: 0 280 750 474 - Not Included) to the OEM Intake...

1JZ-GTE (VVTi & Non-VVTi) Titanium Exhaust Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this st...

1JZ-GTE Titanium Intake Manifold Stud, Nut & Washer. Machined from Titanium (Ti-6AI-4V) with a 5mm Hex Key Head, this stud kit is designed to f...

Our design allows the thermostat to remain in the original position, improving flow and allowing the thermostat bypass port to suitably closed when...

Billet Power Steering Feed Adapter to suit all 1UZ-FE Engines. Perfect for engine conversions where a remote power steering reservoir is required. ...

Billet Throttle Cable Bracket to suit 1UZ-FE Non-VVTi Engines. Made from a single piece of 6061 Aluminium, this bracket is lightweight at only 86 g...

CNC 6061 Billet IACV, EGR & PCV Delete to suit 1UZ-FE OEM Intake Manifolds. FINISH Raw 6061 CNC Billet Aluminium

Venom Automotive 1UZ-FE Non-VVTi Drive By Wire (DBW) Throttle Body Adaptor is design to mount a Bosch 74mm (PN: 0 280 750 474 - Not Included) to th...

Billet OEM Styled Non-VVTI Thermostat housing provides a maintenance-free alternative to the plastic factory option. We replicated to ensure perfec...

This Straight Non-VVTI Thermostat housing provides accessible alternatives to the factory position radiator outlet. SIZING 38mm OD to suit OEM Radi...

Our Type 1 Oil Filter Adapter Plates are designed to suit 1UZ-FE, 2UZ and 3UZ-FE Engines. Made to run twin -10AN lines without impeding oil flow. -...

Oil Drain Adapter kit for Turboing UZ-FE Engines, this adapter bolts into the oil plan replacing the factory oil level sensor. SIZING M20x1.5 Tappe...

1UZ Solid Engine Mounts to replace the soft oem mounts that are prone to tearing in turbo charged applications. Perfect upgrade and will bolt strai...

1UZ-FE, 2UZ-FE & 3UZ-FE (VVTi & Non-VVTi) Titanium Exhaust Manifold Stud, Nut & Washer Machined from Titanium (Ti-6AI-4V) with a 5mm He...