Int. Customers:
Contact Us
Bosch Combined Temperature and Pressure sensor. 2x Sensors in one. 0 261 230 340 0 - 10.0 bar (145psi) Pressure Sensor for liquid -40 - 140 deg ...
View full detailsGenuine Bosch Motorsport pressure sensor 0 261 230 365 0 - 10bar (145psi) Pressure Sensor for liquid Suitable for engine oil 45degree cone seat, ...
View full detailsBosch LSU 4.9 Oxygen Sensor / Lambda Sensor with a 62.5cm or 100cm harness length. 0 281 004 821 LSU 4.9 Wide-band Oxygen / Lambda sensor 62.5cm ...
View full detailsBosch knock sensor 0 261 231 188 Universal knock sensor used in performance engines to detect knock through your compatible ECU. Jetronic 2 pin ma...
View full detailsConnector set to suit Bosch Pressure + Temperature Sensor (0261230340)
Harness Sleeve Pack Includes: Nylon Sleeve - 6mm x 10m, 8mm x 5m, 14mm x 2m & 25mm x 1m. Heatshrink glue lined - 8mm x 1.2m, 12mm x 0.6m, 19mm...
View full detailsWeld Fitting M14 x 1.5 - Small Thread Air Temp Aluminum Suits: Air Temp Sensor - Small Thread.
Firewall Rubber Grommet 51mm (2") OD 28mm (1 1/8") ID.
Link ECU - Ethanol Content Sensor Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the...
View full detailsLink ECU - Link 4 Bar MAP Sensor (MAP4) The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or...
View full detailsFuel Level Sender Signal Conditioner Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Matchi...
View full detailsDescription: Connector set to suit Bosch Drive By Wire Throttle body
Delphi 3 Pin Pressure Sensor Connector - Plug and Pins Only Suits: 5 Bar TI MAP Sensor (HT-010110). 5 Bar Motorsport Stainless Steel Diaphragm MA...
View full detailsLink ECU - Air Temp Sensor Includes 2-pin Deutsch DTM connector kit. Aluminium and steel weld-in mounting bosses are available. 1/8" BSP Thread.
6 Circuit Haltech Fuse Box with Lid Includes: Matching pin set. Notes: Does not include relays or fuses.
Includes: 2 x Crimpers 3 x Removal tools
Pins only - Suit Relays only in the 6 Circuit Fuse Box
Firewall Rubber Grommet - 51mm (2") OD 21mm (13/16") ID
Suits: 8-32 Pin Tyco Connector Range Includes: Pack of 10 Pins.
Gear Tooth Speed Sensor – GT101 Honeywell GT101 Hall Effect Sensor. For use with Ross Performance Parts triggering systems. Compatible with most ...
View full detailsWeld Fitting 3/8 NPT - Suit Large Air Temp - Aluminum Suits: Air Temp Sensor - Large Thread and Coolant Temp Sensor - Large Thread.
Suits: Platinum PRO Plug-in Auxillary I/O Platinum Sport GM Plug-in Auxillary I/O TCA 2 & TCA 4 Elite 750 Plug 'n' Play Adaptor Harness Auxilla...
View full detailsPlug and Pins Only - Suit Flex Fuel Composition Sensor Includes: Pack of 3 pins.
Jaylec Alternator Adaptor Harness 3 Pin Oval Female Plug to 3 Pin Round Male Plug Used to convert late style (oval plug) to early style (round plu...
View full details