Radium - Injector Seats for Toyota Top Feed Fuel Rails Click here to download installation instructions (PDF) These are sold as an individual item ...

This high-accuracy fuel pressure gauge is suitable for all fueling applications. It features an acrylic lens with a silicone filled dial that reads...

BENEFITS-Effectively raises the octane and increases engine performance from cleaner inlet air-Prevents oil buildup in the intake, intercooler, th...

The Radium fuel rail is compatible with the OEM 1JZ-GTE VVT-i top-feed fuel injectors and any aftermarket injectors that fit the OEM fuel rail. Inj...

This Radium Engineering fuel rail is CNC machined from extruded 6063 aluminum, black anodized, and laser etched for a high quality surface finish....

The Radium Engineering Jet Pump is an effective device for drawing fuel from one side of a fuel tank to the other. Fuel flowing through the venturi...

Mounting Hardware The fuel surge tank can be mounted anywhere in the vehicle. However, mounting near collision prone areas, heat sources, or moving...

These stainless steel brackets are designed to properly mount the Fuel Cell Surge Tank (FCST) lift pump to the bottom of the fuel cell. The standar...

This blocks-off the ACV (air control valve) port from the Mazda 13B-REW lower intake manifold. The low profile nature of the countersink stainless ...

1. The fuel level float shroud from Radium 20-0847-XXX is only compatible with newer Radium FCSTs (20-099X-XX).2. For previous Radium 20-049X-XX an...

PUMP COMPATIBILITY This system supports 1 or 2 aftermarket fuel pumps (sold separately):*Walbro F90000267*Walbro F90000274*Walbro F90000285*Walbro ...

20-0757 FUEL RAIL, NISSAN RB20DET This Nissan RB20DET fuel rail is manufactured with a large 0.69" internal bore, the fuel rail can support all nec...

20-0725 CATCH CAN KIT, PCV, NISSAN S13 The PCV catch can kit runs inline between the PCV valve and the intake manifold. It mounts to threaded bosse...

This Nissan Silvia fuel rail is specifically designed for the SR20DET S14/S15 OEM intake manifold.  Manufactured with a 0.69" large internal bore, ...

The fuel rail is designed for any aftermarket injectors that have the same fitment as the OEM injectors. The upper injector bores are machined with...

20-0753 OVERVIEW The Radium Engineering Port Injection Kit (PIK) installs between the intake manifold and the cylinder head. It permits the use of ...

Radium - RA-Series 53L Fuel Cell (14 Gallon) A competition grade fuel cell provides maximum performance and safety for high performance vehicles. R...

The Radium Engineering check valve is very specific to the pump. It will only work on pumps listed below. This 6AN male adapter is used to integrat...

A weld-in cage will ease fuel cell installation by offering a pre-made, safe and secure, robust cradle. The lower cage supports are made from 11 g...

Radium - Direct Mount Regulator Click here to download installation instructions (PDF)   RELEASED 9.11.23 ----The Radium Direct Mount Regulator-Ro...

A duckbill is a one-way valve. They prevent aeration, and reduce fuel slosh noise and are commonly used on the return hose inside fuel tanks to pro...

20-0461 Fuel Level Switch, 1/8 NPT This 1/8" NPT fuel level switch should be installed inside the container, as shown below.  When fuel level drop...

Click here to download installation instructions (PDF) VEHICLE COMPATIBILITY 93-07 Subaru Impreza (including WRX & STi)97-08 Subaru Forester ...

Click here to download installation instructions (PDF) An oil catch can is essential on a performance vehicle to protect the engine from elevated ...