Int. Customers:
Contact Us
Plazmaman RB26 Billet Inlet Manifold, 6x Fuel Injectors & FPR8 Reg. Injectors are Genuine Bosch Units which are E85 Compatible. Would Suit : R...
View full detailsThis upgrade air intake hose is to suit the Nissan Navara ST-X 550 V6 Turbo. This intake hose replaces the restrictive factory rubber hose that run...
View full detailsThis upgrade air intake hose is to suit the Nissan D23 Navara NP300 (Twin-Turbo engines ONLY - Does NOT suit RX Single Turbo models) This intake h...
View full detailsThis upgrade air intake hose is to suit the mid model Nissan Navara/Pathfinder 2.5L D40 (2007-2011). This intake hose replaces the restrictive fact...
View full detailsThis upgrade cold air intake hose is to suit the early model Nissan Navara/Pathfinder 2.5L D40 (2005-2006). This intake hose replaces the restricti...
View full detailsDescription: This Plazmaman upgrade intercooler kit is to suit the Nissan Navara D23 NP300 Turbo Diesel. This kit utilizes OEM mounting positions a...
View full detailsDescription: This hot side piping kit is to suit the late model Nissan Navara/Pathfinder 2.5L D40 2011 Onwards (Spring Clip Ends - Not hose clamps)...
View full details**These billet fuel rails are designed to be fitted in conjunction to a Plazmaman S14/S15 Top Half Plenum. This will not clear factory OEM manifold...
View full detailsDescription: This piping kit is designed to suit a Nissan Skyline R33 GTS-T, using a Plazmaman forward facing inlet plenum (coldside only supplied)...
View full detailsDescription: This piping kit is designed to suit a Nissan Skyline R33 GTS-T, using a Plazmaman forward facing inlet plenum -Both hot and cold side....
View full detailsDescription: This piping kit is designed to suit a Nissan Skyline R32 GTS-T, using a Plazmaman forward facing inlet plenum (coldside only supplied)...
View full detailsDescription: This piping kit is designed to suit a Nissan Skyline R32 GTS-T, using a Plazmaman forward facing inlet plenum - Both Hot and cold side...
View full detailsThis pro-series intercooler piping kit is to suit the Nissan Pulsar RNN14 GTI-R. This piping kit is compatible with most aftermarket side inlet/out...
View full detailsDescription: Plazmaman is the home of the most tried and proven V6 550 Navara/Pathfinder Intercooler upgrade. Just ask around, there are hundreds o...
View full detailsDescription: This hot side piping kit is to suit the early model Nissan Navara/Pathfinder 2.5L D40 (2005-2006). This piping kit replaces the factor...
View full detailsAlso available with aftermarket TPS sensors and Plazmaclamps, please email or call if you need an option not listed in the drop downs This Plazmama...
View full detailsAlso available with aftermarket TPS sensors, Burst Panel, 12 (Twin Rail) Injector ($260 Extra) and Plazmaclamps, please email or call if you need a...
View full detailsAlso available with aftermarket TPS sensors and Plazmaclamps, please email or call if you need an option not listed in the drop downs This Plazmam...
View full detailsAlso available with Plazmaclamps or 8 Injector version, please email or call if you need an option not listed in the drop downs. Plazmaman S14/15...
View full detailsPlazmaman's SR20 S13 (Red Top) inlet manifold is designed with curved inlet runners, which allows for modification to the runner length to suit dif...
View full detailsThe Ultimate Race Bred Swept Back tank intercooler kit for the S14/15 Nissan. The Plazmaman Swept Back Intercooler is used by many Top level WTAC r...
View full details100% piping guaranteed fit - beware of cheap import pipes that do not fit. Supplied with 600 x 300 x 76 mm Pro Series Tube and Fin Intercooler -...
View full detailsALL MANIFOLDS IN THIS LISTING COME WITH THE FOLLOWING ASSUMPTIONS: REMOTE MOUNTED IDLE CONTROL VAC PORTS ON BOTTOM OF MANIFOLD NO BURST PANEL HO...
View full detailsALL MANIFOLDS IN THIS LISTING COME WITH THE FOLLOWING ASSUMPTIONS: REMOTE MOUNTED IDLE CONTROL VAC PORTS ON BOTTOM OF MANIFOLD NO BURST PANEL HOSE...
View full detailsFounded in 1988 in Sydney, Australia, Plazmaman has grown into becoming Australia’s leading manufacturer of high end cooling and performance solutions for the street, racing, diesel and industrial markets. They are highly regarded as an industry leader in quality and performance, which is showcased through a large range of street, and race applications throughout Australia and the world.
At Plazmaman, they have a complete in-house manufacturing, fabrication and finishing facility, containing a range of CNC Machinery, a full time welding department, an in-house R&D department, product polishing, tube bending, and powdercoating section. They also have close relationships with casting companies, silicone hose manufacturers, and core suppliers, both locally, and internationally.
To ensure they keep up with current trends and worldwide performance requirements, they have 6 large engineering partners in Europe, Asia, India and the USA who they share data and technology with. They continue developing and improving our products by constantly investing in new technology and machinery.
As the performance world moves forward – Plazmaman move with it.