Link ECU - G4+ Force GDI

G4+ FORCE GDI

The Force GDI is the first ECU built specially to control Gasoline Direct Injection engines.

As well as full GDI control, the Force GDI offers on-board digital wideband, E-throttle control, high voltage injector and high pressure fuel pump management, plus all the other features you have come to expect from one of Link™s world leading ECUs.

The Force GDI can control up to 4 cylinders with direct injection.

Please confirm with LinkECU's tech support if your engine is supported before purchasing.

SPEC OVERVIEW:

Inputs

• 8/10* x Digital inputs.
• 4 x Temperature inputs.
• 11 x Analog inputs.
• 2 x Trigger inputs.
• 2 x Knock inputs.
• 1 x LSU 4.9 Wideband lambda sensor input.
• *2 inputs required when using the 2nd CAN Bus.

Outputs

• 4 x High voltage injector drivers (60V 10/5A Peak/Hold Current).
• 1 x GDI pump/Spill valve driver (11.8/6A Peak/Hold).
• 4 x Ignition drivers.
• 10 x Auxiliary outputs^.
• +5V Sensor power supply.
• +8V Sensor power supply.
• ^unused ignition drives can be used as additional Aux outputs.

Communications

• 2* x CAN bus.
• 1 x Serial (RS232) connection.
• 1 x USB tuning connection.

Physical

• Dimensions: 185mm(L) x 130mm(W) x 40mm(H) (without looms).
• Mass: 680grams.

Advanced features found only on the Force GDI:

4x high voltage Boost/Peak/Hold GDI injector drives, user-definable voltage, current and durations.

1x Spill valve/GDI pump driver, peak & hold or saturated mode. User-definable current.

What's in the box?
Supplied with USB tuning cable and mounting bracket.  Requires A & B looms or A & B connector kits.