Int. Customers:
Contact Us
CP Forged Pistons for 2JZGTE Engines Available in: Bore: 86mm (STD) / Comp: 9.0:1 - Part#: SC7463 Bore: 86mm (STD) / Comp: 10:1 - Part#: SC7471 - ...
View full detailsCP Forged Pistons for 1JZGTE Engines Available in: Bore: 86mm (STD) / Comp: 9.0:1 - Part#: SC7471 - 1JZ Bore: 86mm (STD) / Comp: 10:1 - Part#: CUS...
View full detailsCP-Carrillo Piston Rings for 86.5 mm Pistons. These CP Piston Rings only fit CP-Carrillo Pistons. This listing is for one set which is good for one...
View full detailsRB25DET NEO CP Forged Pistons Would Suit : RB25DET NEO R34 Engines Other Information: Compression Ratio of 9.0:1Supplied with Circlips, Rings and P...
View full detailsPin upgrades to suit CP pistons. These have the same external diameter but a smaller internal diameter. This gives better strength. All Wrist pi...
View full detailsRB25DET Non Neo CP Forged Pistons Would Suit : RB25DET Non Neo R33 Engines Other Information: Supplied with Circlips, Rings and Pins.
CP Pistons for SR20DE/DET Engines Available in: Bore: 86mm (STD) / Comp: 8.5:1 - Part#: SC73241 Bore: 86.5mm (+0.5mm) / Comp: 8.5:1 - Part#: SC732...
View full detailsCP Bullet Pistons - XR6 Barra Rated at up to 1000hp Bore sizes: +0.5mm (3.652"), +0.25mm, and STD Comp ratio: 9.0:1 2618 Forged Alloy Offset gudge...
View full detailsRB25DET Non Neo CP Forged Pistons Would Suit : RB25DET Non Neo R33 Engines Other Information: Supplied with Circlips, Rings and Pins.
CP Forged Pistons for 1JZGTE Engines Available in: Bore: 86mm (STD) / Comp: 9.0:1 - Part#: SC7471 - 1JZ Bore: 86mm (STD) / Comp: 10:1 - Part#: CUS...
View full detailsThese Spool CP Custom Pistons are available in: Bore: +0.5mm Comp Ratio: 9.0:1 5310 Series Pins 4 Valve Pockets 2618 Forged Alloy Note: Also avai...
View full detailsThese CA18DET Spool CP Custom Pistons are available in: Bore: +0.5mm or +1mm Comp Ratio: 9.0:1 Stroke: 87.6mm 9310 Series Pins Note:Also availabl...
View full detailsThese Spool CP Custom Pistons are available in: Bore: +0.5mm Comp Ratio: 9.0:1 Stroke: 88mm 9310 Series Pins Note: Also available in any bore siz...
View full detailsThese Spool CP Custom Pistons are available in: Bore: +0.5mm or +1mm Comp Ratio: 9.0:1 Stroke: 87.6mm 9310 Series Pins CP Pistons standard featur...
View full detailsCP Pistons for KA24E / KA24DE Engines Available in: Bore: 89mm (STD) / Comp: 8.0:1 (E) and 9.0:1 (DE) - Part#: SC7299 Bore: 89.5mm (+0.5mm) / Comp...
View full detailsCP Pistons for CA18DET Engines Available in: Bore: 83mm (STD) / Comp: 8.5:1 - Part#: SC7345 Bore: 83.5mm (+0.5mm) / Comp: 8.5:1 - Part#: SC7346 Bo...
View full detailsCP Pistons for SR20VE/VET Engines Available in: Bore: 86mm (STD) / Comp: 9.0:1 - Part#: SC7324V Bore: 86.5mm (+0.5mm) / Comp: 9.0:1 - Part#: SC732...
View full detailsSuzuki G13B Custom CP Forged Pistons Piston Specifications: 76mm Bore / 9.0:1 Compression Includes Rings, Pins and Locks. These are made to order...
View full detailsCP Pistons for FA20 / 4U-GSE Engines Available in: Bore: 86mm (STD) / Comp: 9.0:1 - Part#: SC7402 - Special Order Bore: 86.5mm (+0.5mm) / Comp: 9....
View full detailsCP Pistons for FA20DIT Engines We don't carry these in stock but can special order them Available in: Bore: 86mm (STD) / Comp: 10.5:1 - Part#: SC7...
View full detailsCP Pistons for EJ255 WRX Engines Available in: Bore: 100mm (+0.5mm) / Comp: 8.4:1 - Part#: SC7431
CP Pistons for EJ25 DOHC Engines Available in: Bore: 100mm (+0.5mm) / Comp: 8.5:1 - Part#: SC7410
CP Pistons for EJ20 WRX / EJ205 Engines Available in: Bore: 92mm (STD) / Comp: 8.5:1 - Part#: SC7399 Bore: 92.5mm (+0.5mm) / Comp: 8.5:1 - Part#: ...
View full detailsCP Pistons for EJ257 WRX STI Engines Available in: Bore: 99.5mm (STD) / Comp: 8.2:1 - Part#: SC7420 Bore: 99.75mm (+0.25mm) / Comp: 8.2:1 - Part#:...
View full detailsCP-Carrillo has one goal in mind: to offer high quality performance products with excellent customer service. We strive to provide the best internal engine components to the customer; offering both pistons and rods is a tremendous added value for our customers. These two pinnacle products are crafted at our headquarters and manufacturing plant in Irvine, California, USA where cutting edge technology and traditional craftsmanship skills come together. We believe quality is the fundamental and overarching principle that drives us to excellence.
CP-Carrillo acquires Arias Pistons.
Opening of new shipping and receiving facility.
The first introduction of the Diesel Shelf Line of pistons.
CP-Carrillo launches the Bullet Series line of Connecting rods to complement the Bullet Line of pistons.
CP-Carrillo wins the NHRA Pro Stock Car Championship with Erica Enders-Stevens.
Carrillo high-performance connecting rods celebrate 50 years.
CP-Carrillo introduces an Aluminum line of Connecting rods for Alcohol and Fuel Markets.
CP and Carrillo legally become one entity with 2 brands: CP-CARRILLO
Carrillo moves into a 32,000' state-of-the-art manufacturing facility in Irvine, California. The move comes as CP and Carrillo look to leverage expertise, and resources and embrace manufacturing excellence to further business objectives and provide superior quality products to customers.
Carrillo is awarded the ISO 9001:2008 certification in recognition of its standardized best practice production techniques. This acknowledgment comes as Carrillo looks to leverage international expertise and embrace global standards of manufacturing to further business objectives and provide superior quality to customers.
CP launches Bullet line – a high-performance piston off the shelf with standard features.
CP Pistons acquires Carrillo Industries, Inc., the premier supplier of high-performance connecting rods, via Pankl Racing Systems.
CP celebrates its 10th anniversary.
Carrillo adopts the practices of lean manufacturing.
CP expands its line of machines to become more automated and prepare for introduction of economical line of pistons (Bullet).
CP is awarded the ISO 9001:2000 Our multi-level inspection process and quality control programs ensure that every part that leaves our plant is manufactured to the highest standards. Our climate controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment designed specifically for us.
Fred Carrillo retires and sells Carrillo Inc. to a publicly held company: Dover Corporation.
CP Pistons moves manufacturing facility to Irvine.
CP Pistons was founded by the Calvert Brothers.
Carrillo Industries was founded by Fred Carrillo. Fred approached the challenges of manufacturing with the idea of no compromise. He knew the never ending quest for speed would require the same desire in component manufacturing. This Carrillo philosophy is as evident today as it was at Carrillo’s conception in 1963. CP Pistons and Carrillo are members of Pankl Racing Systems.