Plazmaman VL "TURBO" Pro Series Tube & Fin Intercooler & Plenum Kit
Please contact after purchase regarding TPS and BOV size as we have a few different options available. (Price does not inc TPS, available at extra cost).
Plazmaman RB30 VL Top Half Inlet Plenum to suit TURBO RUNNERS. See our other listings if you have a Non Turbo motor and/or runners.
Plazmaman's Lightweight Tube & Fin Intercooler & Top Half Plenum Kit is designed to suit the RB30 Holden VL Commodore. The kit is rated up to 1000hp.
This intercooler & plenum kit is for those who have upgraded turbochargers, and want to run high boost pressures. The kit utilizes a lightweight (6.8kgs) race spec tube and fin 600mm x 300mm x 76mm intercooler core. Also included, is a complete CNC mandrel bent piping system, which allows for greater air flow, and it's aluminium construction won't collapse or flex under boost like a factory rubber constructed hose. Thanks to the plenum design, air is drawn from all sides of ram tube, meaning the power gain is sustained throughout the entire mid and top end rpm range. The plenum design allows the factory throttle cable, and idle motor to be retained. Included with the plenum is a stud and bolt kit, vacuum fittings and complete fitting instructions.
This kit was developed to suit all street, strip, drift and high horsepower applications, using low or high mount turbochargers. The kit will fit the factory turbocharger, and most common manifold and turbo combinations (6boost manifold using GT30R / GT35R / GTX35 / GTW36 / GTW38 / T04Z etc) with the compressor housing outlet facing straight down. If you're looking at running a specifically unique manifold, or larger turbochargers, please specify upon ordering. Or, Contact Us for advice before ordering.
600x300x76mm PRO Series Tube and Fin Intercooler
70mm Hot and Cold side piping kit
Plazmaman Top Half Inlet plenum
All accessories (Silicone hoses, clamp, brackets, Bolts/nuts)
** Please be advised that a Single Hole has to be drilled on the drivers side for the top intercooler pipe to pass through , and a side hole on the passengers side for the turbo hot pipe to fit “ see pictures **
We can also weld a Blow Off Valve adaptor on the piping to suit the most common sizes on the market, 25mm, 32mm, 34mm or 38mm (excludes flange style BOV).
The Intercooler kit is available in raw, polished or stealth black finish.